Fluid Machinery
Thermal-Fluid Engineering
Energy Saving Technology
MEMS/NEMS
Education
(Ph.D.) State University of New York at Buffalo
Experience
1995 - present Sungkyunkwan University, Professor
1991-1995 Korea Atomic Energy Research Institute
1990-1991 Post Doc. State University of New York at Buffalo
Journal Articles
(2024)
결정경계 알고리즘을 활용한 풍력터빈 고장진단 고도화 연구.
대한기계학회논문집 B.
48,
3
(2024)
위어 형상과 오일 점도 변화가 유수분리기 성능에 미치는 영향.
한국유체기계학회 논문집.
27,
1
(2023)
질량유량 증폭기의 직렬 배치조건에 따른 유동특성 연구.
한국유체기계학회 논문집.
26,
6
(2023)
블레이드 필렛 반지름이 천음속 원심압축기 공력성능 및 구조 건전성에 미치는 영향.
한국유체기계학회 논문집.
26,
5
(2023)
주입공기 유량비가 벤치스케일 바이오매스 연소로 내 연소 특성에 미치는 영향.
대한기계학회논문집 B.
47,
7
(2023)
A Study on the Effectiveness of SCD Seeding Fog Dissipation Mechanism Using LiDAR Sensor.
Fluids.
8,
6
(2022)
Hyperparameter Tuning of OC-SVM for Industrial Gas Turbine Anomaly Detection.
ENERGIES.
15,
22
(2022)
Artificial Intelligence-based Aeroacoustic Theories and Research Trends.
Transactions of the Korean Society of Mechanical Engineers, B.
46,
9
(2022)
Experimental Study on the Heat Transfer Performance of Various Magnet Arrangements in a Closed Space Filled with Ferrofluid.
APPLIED SCIENCES-BASEL.
12,
17
(2022)
Performance Characteristics of In-Line Oil Separator with Various Airfoil Vane Configurations of the Axial-Flow Swirl Generator.
PROCESSES.
10,
5
(2022)
Wet Compression Study for an Aero-Thermodynamic Performance Analysis of a Centrifugal Compressor at Design and Off-Design Points.
PROCESSES.
10,
5
(2022)
Effect of Balanced Cutting Configurations on the Aeroacoustics of High-Speed Turbomachinery.
Journal of Physics: Conference Series.
2217,
012013
(2022)
Prediction of Incipient Cavitation in Micro Tubular Propeller Turbine.
Journal of Physics: Conference Series.
2217,
012013
(2022)
슬랫-슬롯을 적용한 임펠러 형상이 송풍기 유동 특성에 미치는 영향.
한국유체기계학회 논문집.
25,
2
(2022)
유전 알고리즘을 활용한 전기 자동차 배터리 방열성능 향상을 위한 가이드 베인 최적설계.
자동차안전학회지.
14,
1
(2022)
The Prediction of Separation Performance of an In-Line Axial Oil-Water Separator Using Machine Learning and CFD.
PROCESSES.
10,
2
(2022)
Multi-objective Optimization of Air-Cooled Lithium-Ion Battery Module Shape Using Artificial Neural Networks and Genetic Algorithms.
TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS B.
46,
2
(2022)
인공신경망과 유전 알고리즘을 이용한 공냉식 리튬이온 배터리 모듈 형상 최적화.
대한기계학회논문집 B.
46,
2
(2021)
습식 압축 기술이 원심압축기 공력성능에 미치는 영향.
한국유체기계학회 논문집.
24,
6
Publications
(2023)
기체역학.
교문사.
Solo
(2020)
유체기계.
교문사.
Lead author
(2015)
유체역학 (Mechanics of Fluids, 4th ed, Merle C. Potter, David C. Wiggert, Bassem Ramadan 원저).
한티미디어.
Lead author
(2015)
전산유체역학 (An Introduction to Computational Fluid Dynamics, The Finite Volume Method, 2nd Ed.,
H.K. Versteeg, W. Malalasekera 원저).
홍릉과학출판사.
Lead author
(2011)
유체역학.
한티미디어.
Lead author
(2003)
공업수학 I & II (Advanced Engineering Mathematics I, 5th ed., Peter V. O'Neil 원저).
학술정보.
Co-author
Patent/Intellectual Property
이중바닥구조물 결속작업용 안전작업도구.
10-2019-0069103.
20191127.
KOREA, REPUBLIC OF
이중바닥구조물 결속작업용 안전작업도구.
10-2019-0069102.
20191127.
KOREA, REPUBLIC OF
화염차단장치.
10-2017-00576342.
20180305.
KOREA, REPUBLIC OF
MATLAB기반 스크류 압축기 로터 치형 설계 프로그램.
C-2016-004277.
20160201.
KOREA, REPUBLIC OF
고점성 유체 분출을 위한 열선장치 이중분사 노즐.
10-2014-0178902.
20151019.
KOREA, REPUBLIC OF
스크류 압축기 이중냉각유로.
10-2014-0006866.
20150331.
KOREA, REPUBLIC OF
전동식 보행 보조차.
10-2012-0040603.
20140401.
KOREA, REPUBLIC OF
접이식 전동 보행 보조차.
10-2012-0040602.
20140401.
KOREA, REPUBLIC OF
휠체어 사용자의 하중을 이용한 휠체어 제동장치(1).
10-2011-0107744.
20130311.
KOREA, REPUBLIC OF
휠체어 사용자의 하중을 이용한 휠체어 제동장치(2).
10-2011-0107745.
20130311.
KOREA, REPUBLIC OF
다종의 화재감지기를 이용한 화재판별 추론 시스템 및 그방법.
제10-0592624호.
20080615.
KOREA, REPUBLIC OF
공기혼합기와 이를 채택한 폼 헤드 어셈블리.
제10-0589037호.
20080605.
KOREA, REPUBLIC OF
지하공동구의 화재 진압용 폼소화시스템.
제10-0589038호.
20080605.
KOREA, REPUBLIC OF
단일벽 탄소나노튜브를 이용한 SF6 GIS에서 발생하는 부분방전 검출 장치 및 방법.
10-0732312.
20070619.
KOREA, REPUBLIC OF
Flying Object by Flapping Motion of Wings Equipped with Compressed Air Engine,(압축공기엔진을 구비하여 날개의 펄럭임 운동에 의하여 비행하는 비행체).
US6540177B2.
20030401.
UNITED STATES
Compressed Air Engine and Flying Object Equipped Therewith압축공기엔진 및 이를 이용한 비행체.
6530541B1.
20030311.
UNITED STATES
Anti-abrasion pipe fittings for high-speed particle-laden flow.
US6422608B1.
20020723.
UNITED STATES
고속유체 이송 배관용 곡형 이음관.
1019980039018.
20001204.
KOREA, REPUBLIC OF
Conference Paper
(2021)
Prediction of Incipient Cavitation in Micro Tubular Propeller Turbine.
The 16th Asian International Conference on Fluid Machinery,.
JAPAN
(2021)
Improving Efficiency of a Micro-Thermophotovoltaic Power Generator with Various Recuperator Configurations.
8th International Symposium on Advances in Computational Heat Transfer.
BRAZIL
(2021)
Effect of Hub Configuration on the Performance of Mixed Flow Turbine for Micro Hydropower in Pipes.
Fluids Engineering Division Summer Meeting FEDSM2021.
UNITED STATES
(2021)
블레이드 진동 모드 형상이 축류압축기 공탄성 안정성에 미치는 영향.
2021 한국유체기계학회 하계 학술대회.
KOREA, REPUBLIC OF
(2021)
슬랫-슬롯을 적용한 임펠러 형상이 송풍기 유동 특성에 미치는 영향.
2021 한국유체기계학회 하계 학술대회.
KOREA, REPUBLIC OF
(2021)
인공신경망과 유전알고리즘을 이용한 공냉식 리튬이온 배터리 모듈 형상 최적화 연구.
대한기계학회 유체공학부문 춘계학술대회.
KOREA, REPUBLIC OF
(2021)
Aerodynamics Characteristics of a Blended-wing-body Aircraft with a Serpentine Inlet Using Flow Control Techniques.
ASME Turbo expo 2021.
UNITED STATES
(2021)
유전 알고리즘을 활용한 전기자동차 배터리 방열성능 향상을 위한 가이드 베인 형상 최적설계.
한국자동차안전학회 춘계학술대회.
KOREA, REPUBLIC OF
(2020)
대형트럭 군집주행이 이웃 차량의 공력특성에 미치는 영향 연구.
2020 한국자동차안전학회 학술대회 논문집.
KOREA, REPUBLIC OF
(2020)
테슬라 밸브 형상이 수격현상 완화에 미치는 영향.
2020 한국유체기계학회 동계학술대회 논문집.
KOREA, REPUBLIC OF
(2020)
선회유동장치 직경비 변화에 따른 인라인 유수분리기의 성능특성 연구.
2020 한국유체기계학회 하계학술대회 논문집.
KOREA, REPUBLIC OF
(2020)
Effect of Spiral Configuration on the Performance of Two-Fluid Spray Atomizer.
제11회 한국유체공학학술대회,.
KOREA, REPUBLIC OF
(2020)
Optimal Design of Thermally Stressed Turbocharger Blade Using Response Surface Method.
ASME 2020 Fluids Engineering Division Summer Meeting.
UNITED STATES
(2020)
Experimental and Numerical Analysis on the Performance of Spiral Two-Fluid Atomizer Using DPM Method.
ASME 2020 Fluids Engineering Division Summer Meeting.
UNITED STATES
(2020)
Numerical Investigation of Debris Behaviors on CMP Pad Surface with Micro Holes.
NANOKOREA2020.
KOREA, REPUBLIC OF
(2020)
Effect of Surface Morphology on the Thermomagnetic Convection Performance of Microchannel.
NANOKOREA2020.
KOREA, REPUBLIC OF
(2019)
선회유동장치 형상변화에 따른 In-Line 유수분리기의 유동특성 연구.
2019 한국유체기계학회 동계학술대회 논문집.
KOREA, REPUBLIC OF
(2019)
ORVM 휜 형상이 공력소음에 미치는 영향.
2019 한국자동차안전학회 추계학술대회 논문집,.
KOREA, REPUBLIC OF
(2019)
Flow Characteristics with Different Slit Configurations of a Bladeless fan.
AICFM15.
KOREA, REPUBLIC OF
(2019)
Effect of Blade Configurations on the Hydraulic Characteristics of the Francis Turbine.
IAHR-Asia 2019.
KOREA, REPUBLIC OF